Chemtronics CircuitWorks® 60 Minute Conductive Epoxy CW2460 User Manual download pdf (Page 4)

CIRCUITWORKS® 60 MINUTE CONDUCTIVE EPOXY - Part B (Hardener)

Store in accordance with local regulations. Store in original container protected from

direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials

(see Section 10) and food and drink. Keep container tightly closed and sealed until

ready for use. Containers that have been opened must be carefully resealed and kept

upright to prevent leakage. Do not store in unlabeled containers. Use appropriate

containment to avoid environmental contamination.

Put on appropriate personal protective equipment (see Section 8). Eating, drinking and

smoking should be prohibited in areas where this material is handled, stored and

processed. Workers should wash hands and face before eating, drinking and smoking.

Remove contaminated clothing and protective equipment before entering eating areas.

Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest.

Keep in the original container or an approved alternative made from a compatible

material, kept tightly closed when not in use. Empty containers retain product residue

and can be hazardous. Do not reuse container.

7. Handling and storage

Handling

Storage

8. Exposure controls/personal protection

Use a properly fitted, air-purifying or air-fed respirator complying with an approved

standard if a risk assessment indicates this is necessary. Respirator selection must be

based on known or anticipated exposure levels, the hazards of the product and the safe

working limits of the selected respirator.

Personal protection

Respiratory

Consult local authorities for acceptable exposure limits.

Engineering measures

Good general ventilation should be sufficient to control worker exposure to airborne

contaminants.

Hygiene measures

Wash hands, forearms and face thoroughly after handling chemical products, before

eating, smoking and using the lavatory and at the end of the working period.

Appropriate techniques should be used to remove potentially contaminated clothing.

Wash contaminated clothing before reusing. Ensure that eyewash stations and safety

showers are close to the workstation location.

Recommended monitoring

procedures

If this product contains ingredients with exposure limits, personal, workplace

atmosphere or biological monitoring may be required to determine the effectiveness of

the ventilation or other control measures and/or the necessity to use respiratory

protective equipment. Reference should be made to appropriate monitoring standards.

Reference to national guidance documents for methods for the determination of

hazardous substances will also be required.

Occupational exposure limits

Ingredient

List name

ppm

mg/

m³

Other

ppm

mg/

m³

Other

ppm

mg/

m³

Other

Notations

silver

US ACGIH 3/2012

0.1

[a]

AB 4/2009

0.1

silver, as Ag

BC 4/2012

0.01

0.03

[A]

silver

ON 1/2013

0.1

[b]

QC 12/2012

0.1

3,6-diazaoctanethylenediamin

ON 1/2013

0.5

[1]

US AIHA 10/2011

[1]

TWA (8 hours)

STEL (15 mins)

Ceiling

[1]Absorbed through skin.

Form:

[a]Dust and fumes [b]Metallic form

Notes:

[A]As Ag

4/9

2460B

10/21/2013.

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Chemtronics CircuitWorks® 60 Minute Conductive Epoxy CW2460 User Manual Page 4

Comments to this Manuals

Related products and manuals for For Home Chemtronics CircuitWorks® 60 Minute Conductive Epoxy CW2460